Аксессуары и комплектующие в Ужгороде

Для радиотворчества, домашних проектов (подходит для ардуино-конструкторов) одноканальный релейный модуль на 5 В (есть и на 12 В в ту же цену), реле на 5В (12В). При подачи 5 В (12 В) замыкает (и размыкает, соответственно, другую пару контактов) реле, можно подключить нагрузку до 10 А (например, на 220 Вольт до 2200 Вт). Можно использовать и без ардуино в паре, например, с датчиком влажности воздуха для включения вентилции или влажения, или с датчиком влажности почтвы для автополива, или датчиком движения, или любым другим датчиком (есть разные, спрашивайте). Новый, в заводской упаковке.
Описание (на англ.):
DC 5V (12V) 10A 15A 1 Channel Relay Module Interface Board Shield for Arduino Low Level Trigger One PIC AVR DSP ARM MCU AC 220V LED Indicator
Features:
1. With isolation groove in control area and load area.
2. With power and relay action indication, bright when connect and go off when disconnects.
3. When there is a signal in signal input, public side and common side will breakover.
4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
5. It can not only control the DC or AC signal, but the 220V AC load.
6. With a permanent open and close vents contact.
7. It is convenient to connect with blue KF301 terminal access control cable.

Specification:
1. VCC: Power interface ,5V
2. GND: Ground
3. IN: Control interface .Drive Current at least 4mA
4. COM: Control circuit ground ,Connect to GND
5. Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''
6. Weight: approx. 12g

Note:
1. High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
2. Low level flip-flops shows that there are voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
3. Please allow 1-3mm differs due to manual measurement.
4. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.